The Campbell Hausfeld cleaning gun (TL103200AV) uses the included siphon pickup tube to introduce cleaning solution into the die-cast aluminum handle, where it's carried by compressed air through the 9-inch chrome steel wand to blast away grease and grime. Prefect for cleaning engine blocks and other tough jobs. This cleaning wand requires 4.0 SCFM of air @ 90 PSI. 1/4 inch NPT (F).
Specification
|
7" ZINC PLATED BLOW GUN
7" nozzle snaps on to any standard air tire -
chuck for quick cleanups
Air supply controlled by handle grip pressure
Use to clean dust & other light debris off -
hard to reach surfaces
106C GR 7 IN. BLOW GUN NOZZLE
SIZE:7"
FINISH:Zinc Plated
|
SAFETY BLOW GUN
Safety type blow gun
Inlet pressure 150 PSI
Meets Federal standards
Meets OSHA noise level requirements
Carded
18-231 SAFETY BLOWGUN
DESC:Button Type
|
ADJUSTABLE BLOW GUN
Quick, easy to use
Twist knuckled nozzle
Adjust from whisper of air to full volume flow
Recommended air pressure to 150 PSI maximum
Handy pocket clip
Attaches to air line coupler
Design: 1/4" coupler bodies
Fits Industrial/Milton
18-603 ADJUSTABLE BLOW GUN
|
TRU-FLATE HI-FLO BLOWGUN
Combines ergonomics with power for an -
enhanced experience
Lightweight aluminum body & easy grip handle
Offers comfort and control
Delivers 88% more air flow than traditional guns
Includes blowgun and safety nozzle
Dimensions: 8.5" x 1.2" x 6.8"
18607 F1 2PC HI FLO BLWGUN KIT
COLOR:Aluminum/Blue
|
SAFETY BLOW GUNS
Perfect for cleaning hard to reach areas in -
cars, tractors, combines & other applications
Blow gun includes safety tip & rubber tip
Max pressure: 150 PSI - Max Temp: 175 deg. F
Zinc alloy body, aluminum extension, stainless-
spring and synthetic washer
Flow 10.5 SCFM @ 100 PSI for safety brass nozzle
Flow 11.6 SCFM @ 100 PSI f/non-safety rubber tip
6-5360 BLOW GUN W/2 FT. WAND
SIZE:2 Ft. Length
|
SAFETY BLOW GUNS
Perfect for cleaning hard to reach areas in -
cars, tractors, combines & other applications
Blow gun includes safety tip & rubber tip
Max pressure: 150 PSI - Max Temp: 175 deg. F
Zinc alloy body, aluminum extension, stainless-
spring and synthetic washer
Flow 10.5 SCFM @ 100 PSI for safety brass nozzle
Flow 11.6 SCFM @ 100 PSI f/non-safety rubber tip
6-5361 BLOW GUN W/4 FT. WAND
SIZE:4 Ft. Length
COLOR:
|
Die-cast body. 1/4" air inlet.
Size In=13
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
The Campbell Hausfeld 1/4-inch pocket blowgun (MP320100AV) has a compact design for easy portability. This blowgun has a built-in plug for added convenience and fits 1/4-inch industrial-style couplers. The airflow adjusts with an easy twist of the knurled nozzle to dial in the right amount of air for the job.
Specification
|
The Campbell Hausfeld 7-piece blow gun kit (MP514100AV) is perfect for cleaning the garage, workshop and other areas. This blowgun kit has a compact design to fit in confined spaces and a hang-up hook for easy storage. Includes safety nozzle, extension nozzle, rubber tip, inflator adapter, tapered inflator nozzle and inflator needle.
Specification
|
The Campbell Hausfeld 2-foot extended blow gun (MP515600AV) easily fits into hard-to-reach spaces, aiding fast cleanup of garages, workshops and other areas.
Specification
|
The Campbell Hausfeld pistol grip blow gun (MP514300AV) is ideal for cleaning confined spaces. This lightweight, pistol-grip blowgun is comfortable to use and has a trigger to control the airflow to the gun tip. Its a narrow, 3-inch extended nozzle that can easily fit into tight spaces.
|
The Campbell Hausfeld blow gun inflator kit (MP211600AV) adds a variety of inflating capabilities to air compressors. Inflate tires, air mattresses, sporting equipment and more. Includes an inflator adapter, tapered inflator nozzle, inflator needle and tire nozzle.
Specification
|
The Campbell Hausfeld extended-nozzle blowgun (MP320200AV) features a 3 1/2-inch nozzle that reaches into confined spaces to blow out debris. This blowgun has a comfortable, easy-to-use lever and accepts rubber tips. Meets OSHA regulations when used with the attached safety nozzle.
Specification
|
High Performance Venturi Blow Gun
|
The Campbell Hausfeld 1/4-inch NPT (F) lever safety blow gun (MP216700AV) is ideal for cleaning areas like garage floors and workbenches. This blow gun also will accept a variety of accessories for inflating tires, sports equipment, rafts and more. A compact design helps this blow gun fit into confined areas, and it includes a hang-up hook for easy storage. Meets OSHA regulations when used with attached safety nozzle.
Specification
|
Quality rubber air hose. 300 PSI. Comes with bonus blow gun kit . Use in garage, shop, industry, or home. Includes: Safety blow gun, coupler and plugs, 5 different tips.
1/4" NPT Fittings
Size In x Ft=3/8 x 50Color=Red
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Combination of a blowgun and the siphon spray nozzle. Barbed siphon inlet fits 1/4 inch ID hose or tubing. Use for spray- cleaning engines, applying protective coating, etc. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply w
ith OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Interchangeable nozzles for cleaning and inflating. Complies with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Includes: standard nozzle, tapered inflator nozzle and ball inflator no
zzle.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Meets OSHA regulation 100-1 for 30 PSI "dead head" pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body with hang-up hook, 1/4" NPT female inlet, and 4" extens
ion.
Carded - Inlet Pressure 150 PSI
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Hang up hook and 1/4" NPT female inlet included. Meets OSHA regulation 1001 for 30 PSI "dead head'' pressure. Inlet Pressure
- 150 PSI.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
For nitrogen or CO2. Excellent choice for all service functions of pressure testing, drain line flushing or coiling cleaning. Kit includes 0-475 PSI nitrogen/CO2 regulator, 10' hose and blowgun with 2' whip hose, 2" needle tip for blowgun, 1/2" and 3/4" rubber cones, drain dawg 3/4" to 1" Drain flusher, air chuck for tire inflation. Min. Order: 1
|
Converts any standard ball foot tire chucks to a safety blowgun. Vented nozzle and built-in pressure reduces limit nozzle pressure to a maximum of 30 PSI, with up to 150 PSI inlet pressure. Conforms to No.1001 OSHA regulation. Epoxy finish.
Spout Lgth In=8-1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Comfortable thumb lever valve control with handy hanger in lever and hanger hook. Compact one piece nozzle. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated
air line with a pressure setting not to exceed 30 PSI.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Oil resistant, soft replaceable rubber tip. Will not mar delicate surfaces. Ideal for leak proof seal against oil passages, fuel lines and carburetors when air pressure is needed for cleaning. Allows full line pressure to be used. Includes 1/4" female NPT
inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Increased performance and yet still meets OSHA regulation 100-1 for 30 PSI 'dead head' pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Complete with hang
-up hook and 1/4" NPT female inlet. Inlet pressure 150 PSI.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
|
|
|
Copyright © 2009-2019 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |