CARTRIDGE ACTIVATION 2 SHOT CARTRIDGE ACTIVATION 2 SHOT
Online
$104.04 for EA
Retail $114.95
Mfr PN: TS1020
Stock: 8
Exclusively designed for use with the Bosch GTS1041A REAXX 10 inch jobsite table saw (8916587). The cartridge is part of the saw's Active Response Technology, which imparts a low-voltage electrical signal onto the blade. The signal alters upon contact wit h the user's skin, triggering a chemical reaction in an activation cylinder similar to the deployment of an airbag in an automobile. In this case, instead of deploying and airbag, the chemical reaction fires a piston that pushes against the drop arm. This action rapidly forces the saw blade down and away from the operator, mitigating serious user injury. Each cartridge allows for two activation s before replacement is needed. Additional onboard cartridge storage is located onboard the tool. After activation, the system can be reset in less than 60 seconds. Each of the dual-activation cartridges has been designed to have a 20 year shelf life and each has an expiration date printed on it. The dual-activation cartridge works with standard 10 i nch fine finish and construction-grade blades and stacked dado blades. Includes 1 Dual-Activation Cartridge. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$104.04 for EA
Retail $114.95
Mfr PN: TS1020
Stock: 8

Cross Cut Panel Saw Accessory - 56-inch Flip Stop Cross Cut Panel Saw Accessory - 56-inch Flip Stop
Online
$358.80 for Each
Mfr PN: FSTP56
Stock: 98

Perfect for use with longer sheets or where cutting exact lengths repetitively.
Can be placed on either the right or left side of machine.
Includes specialized aluminum extrusion, tape and two adjustable stops.

Online
$358.80 for Each
Mfr PN: FSTP56
Stock: 98

Cross Cut Panel Saw Accessory - 96-inch Flip Stop Cross Cut Panel Saw Accessory - 96-inch Flip Stop
Online
$430.80 for Each
Mfr PN: FSTP96
Stock: 0

Perfect for use with longer sheets or where cutting exact lengths repetitively.
Can be placed on either the right or left side of machine.
Includes specialized aluminum extrusion, tape and two adjustable stops.

Online
$430.80 for Each
Mfr PN: FSTP96
Stock: 0

Cross Cut Panel Saw Accessory - Beam Saw Kit (Circular saw and table not included) Cross Cut Panel Saw Accessory - Beam Saw Kit (Circular saw and table not included)
Online
$1652.62 for Each
Mfr PN: BSK
Stock: 98

Provides a 6 inch depth of cut with a cross cut capability of 55 inches.
Accurate and affordable means of sizing thick sheets of material
The panel kits provide the guide tubes, guide tube brackets and our carriage with sealed roller bearings. You build your own frame. You spend a fraction of the price of the full panel saw but still get the accuracy and convenience of an industrial Beam Saw.
REQUIRES MAKITA 5402 NA CIRCULAR SAW

Features:
Super strong 1/4" wall steel guide tubes.
Guide tube support brackets that are powder coated.
Bolt attaching kit.

Includes:
Assembled Carriage
Guide Tubes
Mounting Hardware
Building instructions

Makita saw not included in pricing of kit.

Online
$1652.62 for Each
Mfr PN: BSK
Stock: 98

Cross Cut Panel Saw Accessory - Floating Router Plate Cross Cut Panel Saw Accessory - Floating Router Plate
Online
$515.98 for Each
Mfr PN: FLTR
Stock: 98

Floating platform generates uniform dados even on bowed or twisted material.
Fits on all current Saw Trax models.
Universal design accommodates most router motors.
This set up allow the router to follow the contours of the sheet, giving consistent dado even on bowed or warped material.
Router motor not included.

Online
$515.98 for Each
Mfr PN: FLTR
Stock: 98

Cross Cut Panel Saw Accessory - Frame Dust Collection Upgrade (4 inch hose not included) Cross Cut Panel Saw Accessory - Frame Dust Collection Upgrade (4 inch hose not included)
Online
$156.00 for Each
Mfr PN: IDPL
Stock: 98

If dust collection is an issue in your shop, this is something you need to get.
The bottom of the frame includes an addional port. As the dust falls down to the bottom, the additonal port draws dust away.
Includes 4 inch Port, Adapter, & Additional dust guards
4 inch hose or vacuum not included.

Online
$156.00 for Each
Mfr PN: IDPL
Stock: 98

Cross Cut Panel Saw Accessory - Full Builder's Extensions (Set of 2) Cross Cut Panel Saw Accessory - Full Builder's Extensions (Set of 2)
Online
$504.00 for Each
Mfr PN: BLEXT
Stock: 98

Add 8 Steel Covered Material Rollers for the 2000 or 3000 Series
Set includes two 28" fence extensions
Extends Compact wheel base to 10 feet
Easily removed for storage or transport
Perfect for taking to the jobsite with a Compact machine & Hitch Carrier

Online
$504.00 for Each
Mfr PN: BLEXT
Stock: 98

Cross Cut Panel Saw Accessory - Full Mid-Fence Cross Cut Panel Saw Accessory - Full Mid-Fence
Online
$478.80 for Each
Mfr PN: MDFC
Stock: 98

Prevent back strain by cutting smaller pieces at waist level.
All steel construction v No warping or splintering!
Shelf easily snaps on and off.

Online
$478.80 for Each
Mfr PN: MDFC
Stock: 98

Cross Cut Panel Saw Accessory - Panel Saw Laser Line Cross Cut Panel Saw Accessory - Panel Saw Laser Line
Online
$240.00 for Each
Mfr PN: PSLA
Stock: 98

Set to illuminate cut line of your circular saw or knife cutter insert.
Great for trimming prints in the sign industry.
Uses standard batteries found locally

Online
$240.00 for Each
Mfr PN: PSLA
Stock: 98

Cross Cut Panel Saw Accessory - Spring Hold Down 100-inch Cross Cut Panel Saw Accessory - Spring Hold Down 100-inch
Online
$298.80 for Each
Mfr PN: SPHD100
Stock: 98

Standard on Sign Makers Package
Holds thinner materials against frame for more material support.
Recommended for materials 1/4" or less.
Does not have to be removed when cutting thicker materials.

Online
$298.80 for Each
Mfr PN: SPHD100
Stock: 98

Cross Cut Panel Saw Accessory - Spring Hold Down 52-inch Cross Cut Panel Saw Accessory - Spring Hold Down 52-inch
Online
$214.80 for Each
Mfr PN: SPH52
Stock: 98

Standard on Sign Makers Package
Holds thinner materials against frame for more material support.
Recommended for materials 1/4" or less.
Does not have to be removed when cutting thicker materials.

Online
$214.80 for Each
Mfr PN: SPH52
Stock: 98

Cross Cut Panel Saw Accessory - Spring Hold Down 64-inch Cross Cut Panel Saw Accessory - Spring Hold Down 64-inch
Online
$238.80 for Each
Mfr PN: SPH64
Stock: 98

Standard on Sign Makers Package
Holds thinner materials against frame for more material support.
Recommended for materials 1/4" or less.
Does not have to be removed when cutting thicker materials.

Online
$238.80 for Each
Mfr PN: SPH64
Stock: 98

Cross Cut Panel Saw Accessory - Spring Hold Down 76-inch Cross Cut Panel Saw Accessory - Spring Hold Down 76-inch
Online
$250.80 for Each
Mfr PN: SPHD76
Stock: 98

Standard on Sign Makers Package
Holds thinner materials against frame for more material support.
Recommended for materials 1/4" or less.
Does not have to be removed when cutting thicker materials.

Online
$250.80 for Each
Mfr PN: SPHD76
Stock: 98

Cross Cut Panel Saw Accessory - Spring Hold Down 88-inch Cross Cut Panel Saw Accessory - Spring Hold Down 88-inch
Online
$229.00 for Each
Mfr PN: SPHD88
Stock: 98

• Standard on Sign Makers Package
• Holds thinner materials against frame for more material support.
• Recommended for materials 1/4" or less.
• Does not have to be removed when cutting thicker materials.

Online
$229.00 for Each
Mfr PN: SPHD88
Stock: 98

Cross Cut Panel Saw Accessory - Steel Sleeve for Material Roller (Set of 18) Cross Cut Panel Saw Accessory - Steel Sleeve for Material Roller (Set of 18)
Online
$299.98 for Each
Mfr PN: SRS
Stock: 98

Standard on the 2000 & 3000 Series Panel Saw
Recommended for high production facilities and steel fabricators
Makes material rollers virtually unbreakable
Steel sleeves fit over our traditional material rollers
Plastic Roller & Hub not included

Online
$299.98 for Each
Mfr PN: SRS
Stock: 98

Cross Cut Panel Saw Accessory - Wall Mounting System Cross Cut Panel Saw Accessory - Wall Mounting System
Online
$51.58 for Each
Mfr PN: WMS
Stock: 98

This system will allow you to permanently mount the panel saw to the wall.
Includes mounting brackets and hardware.
Must remove folding stand in order to secure saw to the wall.

Online
$51.58 for Each
Mfr PN: WMS
Stock: 98

Cross Cut Panel Saw Kit - 52-inch Panel Saw Kit Cross Cut Panel Saw Kit - 52-inch Panel Saw Kit
Online
$699.00 for Each
Mfr PN: 52KT
Stock: 98

• They offer the shop or home owner an accurate and affordable means of sizing large sheets of material
• You get the same accuracy, convenience and quality of a commercial panel saw and panel router machine at a fraction of the price.
• The panel kits provide the guide tubes, guide tube brackets and our carriage with the U-bolt style bearings. You build your own frame. You spend a fraction of the price of the full panel saw but still get the accuracy and convenience of an industrial panel saw or panel router.

Features:
• Super strong 1/8" wall steel guide tubes.
• Universal carriage that can easily attach your saw. Router inserts are available.
• Guide tube support brackets that are powder coated.
• Bolt attaching kit.

Includes:
• Assembled Carriage
• Guide Tubes
• Mounting Hardware
• Building instructions
• Universal saw insert with clamps
• Floating router insert available

Online
$699.00 for Each
Mfr PN: 52KT
Stock: 98

Dewalt DW7450 Table Saw Stands, Folding, Portable Dewalt DW7450 Table Saw Stands, Folding, Portable
Online
$89.59 for EA
Retail $98.19
Mfr PN: DW7451/DW7450
Stock: 45
Folds for easy storage. Portable, lightweight and durable. Fits No.DW745 (SKU 281.2428) jobsite table saw. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$89.59 for EA
Retail $98.19
Mfr PN: DW7451/DW7450
Stock: 45

Genesis GTS10SB Heavy Duty Table Saw With Stand, 15 A, 10 in Blade, 4800 rpm Genesis GTS10SB Heavy Duty Table Saw With Stand, 15 A, 10 in Blade, 4800 rpm
Online
$216.15 for EA
Mfr PN: GTS10SB
Stock: 18
5/8" Arbor This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$216.15 for EA
Mfr PN: GTS10SB
Stock: 18

KMA2685 RIP-CUT SAW GUIDE KMA2685 RIP-CUT SAW GUIDE
Online
$39.00 for 1 EA
Mfr PN: KMA2685
Stock: 10
KREG RIP-CUT SAW GUIDE Turn your circular saw into a precision cutting- tool - connects to most circular saws Reversible guide arm for right or left handed us Make accurate cuts from 1" up to 24" wide Rip sheets of plywood in half with just one cut No need for measuring, marking or layout lines 100% guide-supported through the entire cut Quick & accurate adjustments - no tools required KMA2685 RIP-CUT SAW GUIDE COLOR:Blue
Online
$39.00 for 1 EA
Mfr PN: KMA2685
Stock: 10

KMA2700 ACCU-CUT SAW GUIDE KMA2700 ACCU-CUT SAW GUIDE
Online
$79.00 for 1 EA
Retail $81.99
Mfr PN: KMA2700
Stock: 18
KREG ACCU-CUT SAW GUIDE Rip, cross cut, & make angled cuts up to 48" - long in plywood, MDF and panels Simply align aluminum Guide Track with your - marks to make accurate cuts Anti-slip guide strips hold track in place Anti-chip strips prevent splintering With saw sled, 2 guide tracks & connectors, - starting block & track indicator clip KMA2700 ACCU-CUT SAW GUIDE COLOR:Blue/Aluminum
Online
$79.00 for 1 EA
Retail $81.99
Mfr PN: KMA2700
Stock: 18