1. Home:
  2. newproducts
 

New Products

(Open Box) 30-PIECE INSERT BIT SET (Open Box) 30-PIECE INSERT BIT SET
Online
$28.10 for 1 ST
Retail $32.99
Mfr PN: 357030
Stock: 1
30-PC. FASTENER DRIVE SET Contains magnetic nutsetters-1/4-5/16-3/8-7/16" 4 double end power bits 21 contractor grade insert bits Magnetic bit holder Packed in durable ABS storage case Features slide latch & size markings 357030 30PC INSERT BIT SET
Online
$28.10 for 1 ST
Retail $32.99
Mfr PN: 357030
Stock: 1

Dual Fuel 10,000/8,000 Watt (Hybrid Series) Generator Dual Fuel 10,000/8,000 Watt (Hybrid Series) Generator
Online
$1264.57 for EA
Mfr PN: FGH08051
Stock: 10

Perfect for camping, tailgating, or when you need power on the go. The FIRMAN P01001 generator features 1050 starting Watts and 1300 running watts. Our Whisper Series muffler keeps the P01001 running a quiet 63 decibels v well below the standards set by the National Parks Service, and our spark arrester has been approved by the USDA Forest Service. The industry-leading 1.3 gallon fuel capacity provides a whopping 9 hours of run time. Our rubberized Thresher handle makes recoil starting a snap v even with bulky gloves.

Feature:

  • Cast iron sleeved engine for long durability
  • Largest tank in the industry with extended run-time
  • Quiet muffler with USDA FS certified spark arrester
  • Conveniently located multi-featured control panel
  • Automatic low oil shutdown protection
Online
$1264.57 for EA
Mfr PN: FGH08051
Stock: 10

14.5 Amp 2030 PSI Pressure Washer 14.5 Amp 2030 PSI Pressure Washer
Online
$301.94 for EA
Mfr PN: MTS-2030PW-MPL
Stock: 10

Take on your toughest home, outdoor, and auto cleaning tasks with ease thanks to the MTS-2030-PW Electric Pressure Washer by Martha Stewart. With 1800 watts of pure pressurized power, the 14.5-amp motor generates up to 2030 PSI to eliminate every last bit of dirt, grease and grime. With the five included Quick-Connect tips and onboard detergent tank you can easily go from an intense jet to a gentle, soapy spray to suit all of your cleaning needs.

Feature:

  • Pressure-Select Technology: Choose from two cleaning options
  • TSS (Total Stop System) v automatically shuts off pump motor
  • 5 Quick-Connect spray tips (0ª, 15ª, 25ª, 40ª and Soap)
  • 54.1 fl oz detergent tank
  • 14.5-amp motor generates up to 2030 PSI MAX./1.76 GPM
  • Easy-glide wheels for control and maneuverability
Online
$301.94 for EA
Mfr PN: MTS-2030PW-MPL
Stock: 10

18V LXT« Lithium-Ion Brushless Cordless Drywall Screwdriver, Tool Only 18V LXT« Lithium-Ion Brushless Cordless Drywall Screwdriver, Tool Only
Online
$214.69 for EA
Retail $250.00
Mfr PN: XSF03Z
Stock: 10

The 18V LXT+ Lithium-Ion Cordless Drywall Screwdriver-tool only, batteries and charger sold separately-breaks new ground for drywall contractors. It's powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. It's built for added durability with Extreme Protection Technology (XPT+), It is ideal for hanging sheetrock, metal framing, installing subfloors, backer board, and decking applications.

Feature:

  • Drives 2,325 screws with Push Drive+ Technology
  • 0-4,000 RPM for a variety of drywall & framing applications
  • Push Drive+ Tech. v motor starts only when engaged
  • Adjustable nose piece delivers consistent screw depth
  • Lock-on button for continuous use
  • Compact and ergonomic design at only 9-7/8" long
Online
$214.69 for EA
Retail $250.00
Mfr PN: XSF03Z
Stock: 10

Variable Speed - Orbital Jig Saw Variable Speed - Orbital Jig Saw
Online
$112.12 for EA
Retail $126.00
Mfr PN: 4329K
Stock: 10

The Makita 4329K Top Handle Jig Saw combines power with a compact design and ease-of-use features for a range of cutting applications. Engineered with a powerful 3.9 amp motor. The variable-speed control dial (500-3,100 spm) delivers optimal cutting performance in a variety of materials. The die-cast aluminum base bevel cuts 45 degrees right or left with a positive stop at 90 degrees for solid cutting performance.

Feature:

  • 3 orbital settings plus straight cutting
  • Ergonomically designed rubberized grip
  • Variable speed dial control (500-3,100 SPM)
  • Counterweight balancing system for reduced vibration
  • Die-cast aluminum base adjusts to 45¬,positive stop at 90¬
  • Large trigger switch for easy operation.
Online
$112.12 for EA
Retail $126.00
Mfr PN: 4329K
Stock: 10

10" Contractor Table Saw with Stand 10" Contractor Table Saw with Stand
Online
$1251.84 for EA
Retail $1600.00
Mfr PN: 2705X1
Stock: 10

Makita's 10" Contractor Table Saw w/Portable Stand is a versatile and powerful table saw for use in the shop or on the jobsite. The 2705X1 combines a range of convenience & ease-of-use features with large capacity and 15 AMP power, making it a true best-in-class table saw for a range of professional applications. The portable stand is jobsite tough for easy transport. The saw has complete storage capacity to hold most commonly used accessories including saw blade, power supply cord, miter gauge, rip fence, push stick, wrench, safety guard & dado blade.

Feature:

  • Powerful 15.0 AMP motor delivers 4,800 RPM
  • Large cutting capacity (3-9/16" at 90¬ and 2-1/2" at 45¬
  • Large 25" ripping capacity f/cutting plywood/sheet material
  • Easy to read scale w/magnifying glass for increased accuracy
  • Smooth action rip fence slides easily across the table
  • Tool-less" modular blade guard system
Online
$1251.84 for EA
Retail $1600.00
Mfr PN: 2705X1
Stock: 10

12v Lithium-Ion 1/4" Hex 2-Speed Driver-Drill kit 12v Lithium-Ion 1/4" Hex 2-Speed Driver-Drill kit
Online
$159.65 for EA
Retail $219.99
Mfr PN: FD05R1
Stock: 10

Drill kit is compact in size and able to fit into tool pouches for the tradesman and accommodate users that like a smaller lighter driver drill that will still get the work done. Makita's 12v max Lithium-Ion batteries provide longer run time and lower self-discharge. The battery re-charges in 50 minutes allowing for more work. The charger earned the ENERGY STAR label for meeting the strict energy-efficient guidelines set by the US Environmental Protection Agency (EPA) and US Department of Energy (DOE).

Feature:

  • 200-Inch lbs of Max Torque in an ultra compact design
  • Variable 2-speed design (0-350 and 0-1,300 RPM) c
  • Ultra compact design at 7-7/16" long and weighs only 2.2 lb
  • Built-in L.E.D. light illuminates the work area
  • Ergonomic shape fits like a glove with even pressure
Online
$159.65 for EA
Retail $219.99
Mfr PN: FD05R1
Stock: 10

3/4" Hammer Drill 6.6 Amps 3/4" Hammer Drill 6.6 Amps
Online
$164.25 for EA
Retail $199.99
Mfr PN: HP2050
Stock: 10

The Makita 3/4 in. Hammer Drill is powered by a 6.6 AMP motor that is engineered for the most demanding applications. The HP2050 features a torque-limiting clutch that disengages automatically if the bit binds, and a positive-stop mode selector that helps prevent accidental mode disengagement. Additional features include less weight (only 5.6 lbs.), a large trigger switch, and an ergonomic rubberized grip for increased comfort.

Feature:

  • Powerful 6.6 AMP motor for the most demanding applications
  • 2-mode op. for "Rotation Only" or "Hammering with Rotation"
  • Variable 2-speed (0-1,200 & 0-2,900 RPM)
  • Torque limiting clutch engineered to reduce gear damage
  • Air vent holes supply required ventilation
Online
$164.25 for EA
Retail $199.99
Mfr PN: HP2050
Stock: 10

18V LXT« Lithium-Ion Cordless 4-1/2" Chain Saw, Tool Only 18V LXT« Lithium-Ion Cordless 4-1/2" Chain Saw, Tool Only
Online
$267.60 for EA
Retail $399.99
Mfr PN: XCU01Z
Stock: 10

The XCU01Z Chain Saw has a 4-1/2" guide bar and the Makita-built motor delivers 980 FPM for increased cutting speed. The cordless XCU01Z has zero emissions and reduced maintenance, with no need to drain the fuel for storage. Simply pickup the LXCU01Z, load an 18V LXT Lithium-Ion battery (sold separately), and the saw is ready to use.

Feature:

  • The Perfect Chain Saw for Limbing, Powered by 18V LXT
  • 4-1/2" guide bar is ideal for limbing
  • Tool-less" chain adjustments
  • Zero emissions and reduced maintenance
  • Compact and ergonomic design at only 16-5/8" long & 5.4 lbs
  • Electric brake for maximum productivity
Online
$267.60 for EA
Retail $399.99
Mfr PN: XCU01Z
Stock: 10

18V Compact Lithium-Ion Cordless Impact Driver Kit 18V Compact Lithium-Ion Cordless Impact Driver Kit
Online
$254.25 for EA
Retail $410.00
Mfr PN: XDT11R
Stock: 10

The XDT11R delivers power & speed in a compact size for a full range of driving and fastening tasks, with a fast-charging 18V Compact Lithium-Ion battery for less downtime. Makita's XDT11R is engineered with a proprietary hammer and anvil impact mechanism that is manufactured using the best raw materials with the highest quality steel for maximum fastening and driving power. With Extreme Protection Technology (XPT), the XDT11R is engineered for improved water and dust resistance for operation in harsh job site conditions.

Feature:

  • Variable speed (0-2,900 RPM & 0-3,500 IPM) and 1,460 in.lbs
  • Makita-built 4-pole motor with innovative 4-brush design
  • Compact and ergonomic design at only 5-3/8" long
  • Weighs only 2.8 lbs. w/battery for reduced operator fatigue
  • Convenient one-touch 1/4" hex chuck for quick bit changes
Online
$254.25 for EA
Retail $410.00
Mfr PN: XDT11R
Stock: 10

18V LXT« Lithium-Ion Brushless Cordless High Torque 1/2" Sq. Drive Impact Wrench, Tool Only 18V LXT« Lithium-Ion Brushless Cordless High Torque 1/2" Sq. Drive Impact Wrench, Tool Only
Online
$387.96 for EA
Retail $599.99
Mfr PN: XWT08Z
Stock: 10

The Makita 18V LXT+ Lithium-Ion Brushless Cordless High Torque 1/2" Sq. Drive Impact Wrench (XWT08Z, tool only) combines 740 ft.lbs. fastening torque and 1,180 ft.lbs. break-away torque with extended run time and speed control for unmatched fastening performance. It features an efficient Makita brushless motor for longer run time, increased power and speed, and longer tool life. The electronic 3-speed power selection switch gives users more precise fastening control.

Feature:

  • 740 ft.lbs. of fastening torque/1,180 ft.lbs of breakaway
  • 1/2" anvil with friction ring
  • Efficient BL+ Brushless motor
  • Compact and ergonomic design at only 9" long
  • Weighs only 7.9 lbs. with battery (battery not included)
  • Rubberized soft grip handle
Online
$387.96 for EA
Retail $599.99
Mfr PN: XWT08Z
Stock: 10

1-1/4 HP Compact Router Kit 1-1/4 HP Compact Router Kit
Online
$337.82 for EA
Retail $420.00
Mfr PN: RT0701CX3
Stock: 10

Powerful 1-1/4 HP Compact Router Kit. Powerful 1-1/4 HP motor delivers improved performance. Soft start feature for smooth start ups .High visibility base design for improved handling and performance. Base can be removed quickly to install other bases. Shaft lock for quick and easy bit changes. Durable flat top design for added convenience when changing bits. Non-marring high-durability base insert for increased work piece protection. Easy-to-read depth scales. Double insulated. Ideal for routing small profiles, dovetailing, door hinges and more.

Feature:

  • Variable Speed Control Dial (10000-30000RPM)
  • Smooth Rack-and-Pinion Fine Depth Adjustment
  • Slim & Ergonomically Designed for Comfort & Control
  • Quick Release Cam Lock System for Easy Depth Adjustments
  • Electronic Speed Control Maintains Constant Speed Under Load
Online
$337.82 for EA
Retail $420.00
Mfr PN: RT0701CX3
Stock: 10

Palm Finishing Sander Palm Finishing Sander
Online
$89.73 for EA
Retail $119.00
Mfr PN: BO4556K
Stock: 10

Makita's Finishing Sander, Model BO4556K, combines fast, smooth performance with a contoured rubberized palm grip and ease-of-use features. The BO4556K is ideal for wood workers and finish carpenters who require a best-in-class sander. Weighs just 2.6 pounds and is engineered with a 2 AMP motor that delivers 14,000 OPM for fast and smooth finishing sanding. The precision-engineered all ball bearing construction significantly reduces vibration and noise. Comfort and ease-of-use features include an ergonomically designed contoured rubberized palm grip.

Feature:

  • Motor operates at 14,000 OPM for fast, efficient sanding
  • Low noise operation w/ reduced vibration
  • Comfortable clamp lever
  • All ball bearing construction.
  • Dust bag for clean sanding and extended sandpaper life
  • Includes tool case.
Online
$89.73 for EA
Retail $119.00
Mfr PN: BO4556K
Stock: 10

18V LXT« Li-Ion Brushless Cordless High Torque 1/2" Sq. Drive Impact Wrench Kit w/ Friction Ring 18V LXT« Li-Ion Brushless Cordless High Torque 1/2" Sq. Drive Impact Wrench Kit w/ Friction Ring
Online
$696.32 for EA
Retail $799.99
Mfr PN: XWT08T
Stock: 10

The Makita 18V LXT+ Lithium-Ion Brushless Cordless High Torque 1/2" Sq. Drive Impact Wrench w/ Friction Ring Anvil Kit (XWT08T) combines 740 ft.lbs. fastening torque and 1,180 ft.lbs. break-away torque with extended run time and speed control for unmatched fastening performance. It features an efficient Makita brushless motor for longer run time, increased power and speed, and longer tool life. The electronic 3-speed power selection switch gives users more precise fastening control.

Feature:

  • 740 ft.lbs. of Max Torque/1,180 ft.lbs of breakaway torque
  • 3-speed power selection switch
  • Compact and ergonomic design at only 9" long
  • 1/2" anvil with friction ring for quick &easy socket change
  • Built-in dual L.E.D. lights with preglow and afterglow
  • Weighs only 7.9 lbs. with battery
Online
$696.32 for EA
Retail $799.99
Mfr PN: XWT08T
Stock: 10

18V Compact Lithium-Ion Cordless 1/2" Driver-Drill Kit 18V Compact Lithium-Ion Cordless 1/2" Driver-Drill Kit
Online
$254.25 for EA
Retail $410.00
Mfr PN: XFD10R
Stock: 10

The XFD10R delivers power, performance and superior ergonomics in a compact size, with a fast-charging battery for less downtime. It features a 4-pole motor that delivers 480 in. lbs. of Max Torque & 25% more speed than the previous model. Powered by a Makita-built 4-pole motor that delivers 480 inch-pounds of Max Torque, with an all-metal two-speed transmission (0-600/0-1,900 RPM). It has a compact and ergonomic design with less weight and superior balance for reduced operator fatigue, and a rubberized soft grip for increased comfort on the job.

Feature:

  • Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque
  • Mechanical 2-speed transmission (0-600 & 0-1,900 RPM)
  • Engineered to provide increased dust and water resistance
  • Dual L.E.D. lights with afterglow illuminate the work area
  • Ergonomically designed handle with rubberized soft grip
Online
$254.25 for EA
Retail $410.00
Mfr PN: XFD10R
Stock: 10

18V LXT« Lithium-Ion Compact Cordless 1/2" Hammer Driver-Drill Kit (2.0Ah) 18V LXT« Lithium-Ion Compact Cordless 1/2" Hammer Driver-Drill Kit (2.0Ah)
Online
$270.81 for EA
Retail $299.99
Mfr PN: XPH10R
Stock: 10

The Makita 18V LXT+ Lithium-Ion Cordless 1/2-Inch Hammer Driver-Drill combines speed and torque in a compact size, with an efficient 2.0Ah battery that reaches a full charge in only 25 minutes. For increased versatility, it can be run as a driver-drill or a hammer driver-drill, and is engineered for applications in wood, metal, masonry, and concrete.With Extreme Protection Technology (XPT), the drill is engineered for increased dust and water resistance and is ideal for use in harsh jobsite conditions.

Feature:

  • Makita-built 4-pole motor delivers 480 in.lbs. Torque
  • 2-speed design (0-600 & 0-1,900 RPM)
  • Rubberized soft grip provides increased comfort on the job
  • Dual L.E.D. lights with afterglow illuminate the work area
  • (2) 18V 2.0Ah batteries, rapid charger & case
Online
$270.81 for EA
Retail $299.99
Mfr PN: XPH10R
Stock: 10

Impact GOLD« 26 Pc. Torsion Bit Set Impact GOLD« 26 Pc. Torsion Bit Set
Online
$32.53 for EA
Retail $39.95
Mfr PN: B-46919
Stock: 10

Makita Impact GOLD+ is new innovation in fastening with a full line of insert bits, bit holders, nutsetters, socket adapters, and more. Impact GOLD+ is designed exclusively for use with high-torque impact drivers, with high-strength steel for longer life, and a precision-fit tip engineered to prevent "cam-out" and stripping. The Impact GOLD+ Ultra-Magnetic Insert Bit Holder and bits feature Xtreme Torsion Technology, which allows the torsion section of the bit and bit holder to flex under load.

Feature:

  • Impact GOLD+ insert bits last up to 60X longer than standard insert bits
  • Double Ended Power Bits feature one bit with two magnetic tips for quick bit changes
  • Mag Boost makes any power bit magnetic
  • Xtreme Torsion Technology is engineered to allow the torsion section of the bit and bit holder to flex under load, taking pressure off of the bit tip
  • Ideal for driving screws in a wide variety of heavy-duty fastening applications including deck building, framing and installing plywood subfloor
Online
$32.53 for EA
Retail $39.95
Mfr PN: B-46919
Stock: 10

18V LXT« Lithium-Ion Cordless 1/2" Hammer Driver-Drill Kit (4.0Ah) 18V LXT« Lithium-Ion Cordless 1/2" Hammer Driver-Drill Kit (4.0Ah)
Online
$452.66 for EA
Retail $596.99
Mfr PN: XPH03MB
Stock: 10

The 18V LXT+ Lithium-Ion 1/2" Hammer Driver-Drill delivers a full 750 in.lbs. of Max Torque, with more work &less down time for increased efficiency &productivity. It's powered by the Makita 18V LXT+ Lithium-Ion 4.0Ah battery, which reaches a full charge in only 40 minutes. For added convenience, the battery features an integrated L.E.D. battery charge level indicator. For increased durability, Extreme Protection Technology (XPT+) is engineered inside the tool for increased resistance to water and dust and improved operation in harsh jobsite conditions.

Feature:

  • Mechanical 2-speed transmission
  • Compact and ergonomic design at only 8-7/8" long
  • Weighs only 5.1 lbs. with battery for reduced operator fatigue
  • Engineered to provide increased dust and water resistance in harsh job site conditions
Online
$452.66 for EA
Retail $596.99
Mfr PN: XPH03MB
Stock: 10

12" Compound Miter Saw 12" Compound Miter Saw
Online
$540.22 for EA
Retail $616.00
Mfr PN: LS1221
Stock: 10

Makita's LS1221 12-Inch Compound Miter Saw combines power, performance, and ease of use for common miter cuts, including a range of applications in woodworking, cabinetry, deck building, framing, and more. The LS1221 has a large capacity (3-7/8 inches x 6 inches at 90 degrees), with a 4-1/2-inch tall pivoting fence for cutting up to 5-1/2-inch crown molding and a pivoting fence for supporting larger stock. The saw has 9 positive miter stops at 15, 22.5, 31.6, and 45 degrees (left or right), and 0 degree (90-degree cuts).

Feature:

  • Powerful 15 AMP motor. Dual post compound pivoting arm
  • Precision machined aluminum base
  • 9 positive stop positions & pivoting fence.
  • Includes Carbide tipped blade, dust bag, extension wings.
Online
$540.22 for EA
Retail $616.00
Mfr PN: LS1221
Stock: 10

Self-Leveling Combination Cross-Line/Point Laser Self-Leveling Combination Cross-Line/Point Laser
Online
$498.05 for EA
Retail $539.99
Mfr PN: SK103PZ
Stock: 10

Lasers are typically utilized in the early stages of construction and measurement needs will vary based on application requirements. The Makita Self-Leveling Combination Cross-Line/Point Laser (SK103PZ) gives the user an all-in-1 solution that combines all possible laser measurement needs required within a 50 ft. distance range requirement. It provides all possible reference lines required in leveling, aligning, plumbing and squaring applications for maximum versatility.

Feature:

  • Provides all possible reference lines and points
  • Line and point accuracy of +/- 1/8" error rate at 30'
  • Extended laser line fan length spans well past 90¬ point
  • Integrated pendulum lock offers added protection
  • Magnetic bracket, target card, (3) AA batt., carrying pouch
Online
$498.05 for EA
Retail $539.99
Mfr PN: SK103PZ
Stock: 10

Laser Distance Measure Laser Distance Measure
Online
$144.46 for EA
Retail $165.00
Mfr PN: LD050P
Stock: 10

Laser distance measures offer a fast and convenient solution to distance measuring applications that would otherwise require multiple steps to achieve. The Makita Laser Distance Measure, 164 ft. (model LD050P) is engineered to make tape measuring methods obsolete and provide unmatched productivity and sophistication for a full range of measuring applications. The LD050P provides a distance operating range of up to 164 ft. for moderate distance capacity and has a top-class accuracy of +/- 5/64 in. for maximum precision.

Feature:

  • Laser Distance Measure 164'
  • Compact, lightweight design for storage & portability
  • Measuring distance operating range up to 164'
  • Provides top-class accuracy of +/- 5/64" for max. precision
  • Provides 7 measurement functions
Online
$144.46 for EA
Retail $165.00
Mfr PN: LD050P
Stock: 10

18V X2 LXT« Lithium-Ion (36V) Cordless Chain Saw, Tool Only 18V X2 LXT« Lithium-Ion (36V) Cordless Chain Saw, Tool Only
Online
$289.06 for EA
Retail $399.99
Mfr PN: XCU02Z
Stock: 10

The 18V X2 LXT Chain Saw (model XCU02Z) is powered by two 18V LXT batteries (36V), so you get 36V power and run time for corded and gas-powered demands, without leaving the 18V LXT platform. Batteries and charger are sold separately.

Feature:

  • Powered by Two 18V LXT+ Lithium-Ion Batteries
  • 2 18V LXT+ Lithium-Ion batt. deliver power & performance
  • 18V LXT+ platform (batteries not included)
  • Low noise level at only 89 dB(A)
  • Zero emissions for operator comfort
  • 12" guide bar for increased capacity
Online
$289.06 for EA
Retail $399.99
Mfr PN: XCU02Z
Stock: 10

18V LXT« Lithium-Ion Brushless Cordless 4-1/2" / 5" Cut-Off/Angle Grinder Kit (5.0Ah) 18V LXT« Lithium-Ion Brushless Cordless 4-1/2" / 5" Cut-Off/Angle Grinder Kit (5.0Ah)
Online
$508.78 for EA
Retail $699.99
Mfr PN: XAG04T
Stock: 10

Makita delivers corded grinding performance without the cord with the 18V LXT Lithium-Ion Brushless Cordless 4-1/2" Cut-Off/Angle Grinder. It's powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. Makita's exclusive Automatic Speed change Technology automatically adjusts speed and torque during operation for optimal performance. Ideal for grinding, cutting and sanding a wide range of materials including tile, concrete, pipe, conduit, and more. Includes BL1840BDC1 18V LXT Battery Charger Pack.

Feature:

  • POWER : BL+ Brushless motor delivers 8,500 RPM
  • INNOVATION : Automatic Speed Change+ technology adjusts speed and torque during operation for optimum performance
  • CONVENIENCE : 3-stage L.E.D. gauge indicates battery charge level
  • CONTROL : AFT+ turns the motor off if rotation of the wheel is suddenly forced to stop
  • INCLUDES - (2) 18V LXT+ 5.0Ah Lithium-Ion batteries, rapid charger, grinding wheel, cut-off wheel, wheel guard, cut-off wheel guard and tool bag
Online
$508.78 for EA
Retail $699.99
Mfr PN: XAG04T
Stock: 10

18V LXT« Lithium-Ion Cordless 1/2" Driver-Drill Kit 18V LXT« Lithium-Ion Cordless 1/2" Driver-Drill Kit
Online
$452.66 for EA
Retail $574.00
Mfr PN: XFD03M
Stock: 10

The XFD03M is powered by a Makita-built 4-pole motor with bigger front end ball bearings, and delivers a full 750 in.lbs. of Max Torque. The new planetary gear system and transmission has been redesigned for increased durability in a more compact size, so the XFD03M is 8-7/8" long and weighs only 5 lbs. for superior power to weight ratio.

Feature:

  • Makita-built 4-pole motor delivers an industry-leading 750 in.lbs. of Max Torque, 25% more than the previous model
  • Mechanical 2-speed transmission (0-400 & 0-2,000 RPM) covers a wide range of drilling and fastening applications
  • Compact design at only 8-7/8" long and weighs only 5.0 lbs. for reduced operator fatigue
  • Extreme Protection Technology (XPT) is engineered to provide improved dust and water resistance for operation in harsh conditions
  • All metal gears and aluminum gear housing for maximum jobsite durability
  • Dual L.E.D. lights with afterglow enhanced illumination of work area
Online
$452.66 for EA
Retail $574.00
Mfr PN: XFD03M
Stock: 10

2" 18 ga. Brad Nailer 2" 18 ga. Brad Nailer
Online
$135.26 for EA
Retail $189.99
Mfr PN: AF505N
Stock: 10

Drives a range of 18 gauge brad nails, from 5/8" to 2", into hard or soft wood applications; magazine application is up to 100 nails, Quick release cam-lock opens nail guide assembly to easily clear jammed nails; efficient design minimizes downtime, Easy to use "tool-less" depth adjustment dial for a wide variety of finish applications.

Feature:

  • Non-marring rubber nose and bumpers protect the wood
  • Sky hook can be rotated 180¬ and attached on either side
  • Dual nail reload indicator windows
  • Multi-directional exhaust port rotates
  • Rubber covered hand grip
Online
$135.26 for EA
Retail $189.99
Mfr PN: AF505N
Stock: 10

3/8" Drill 3/8" Drill
Online
$132.50 for EA
Retail $138.00
Mfr PN: 6408K
Stock: 10

This variable speed, reversible drill features a beefy 4.9 amp motor for powering through those tough jobs. Bit installation is a snap with the nifty keyless chuck system. The larger trigger switch won't wear out your trigger finger. This baby is easy on the ears with a decibel rating of 79dB. Its clever inline handle design maximizes power thrust. A large, recessed lock-on button will get you through those long jobs. And to extend tool life, Makita designed this double insulated tool with all ball bearing construction, as usual.

Feature:

  • Powerful 4.9 AMP motor w/ quiet operation of 79dB.
  • Keyless chuck for fast and easy bit installation & removal
  • Variable speed
  • Large trigger and Lock-on button.
  • In-line handle design for better control.
  • All ball bearing construction.
Online
$132.50 for EA
Retail $138.00
Mfr PN: 6408K
Stock: 10

18-Volt LXT Lithium-Ion Battery and Charger Starter Pack 18-Volt LXT Lithium-Ion Battery and Charger Starter Pack
Online
$194.00 for EA
Retail $269.99
Mfr PN: BL1840BDC1
Stock: 10

Makita's 18-Volt Lithium-Ion series is an expansive tool line-up powered by an 18-Volt lithium-ion slide-style battery. At the heart of the LXT series is the 18-Volt LXT lithium-ion battery and the efficient Rapid Optimum Charger. These batteries charge faster and work longer than standard lithium-ion batteries, giving your cordless tools unmatched performance and productivity to take on the most demanding applications.

Feature:

  • 18V LXT Lithium-Ion 4.0 Ah charges in 40 minutes or less
  • Delivers peak performance under extreme conditions (-4¬F)
  • Impact-resistant outer case and shock-absorbing inner-liner
Online
$194.00 for EA
Retail $269.99
Mfr PN: BL1840BDC1
Stock: 10

100 Gal / 48" Commercial Job Box with Fork Lift 100 Gal / 48" Commercial Job Box with Fork Lift
Online
$473.68 for EA
Mfr PN: BMJB4824FL
Stock: 10

The Suncast Commercial job box is unique in that it is designed to be lighter than traditional metal boxes, making it easier to transport while still maintaining ultimate durability. The entire box is fully secured with metal reinforcements for added strength. Two nickel-plated latches come padlock compatible, keeping your items safe & secure when stocked away. This innovative job box also features automotive grade weather stripping to seal out water and withstand the elements. Built to last and will not bend, rust, scratch, or dent. Fully forkliftable.

Feature:

  • Weather resistant - automotive grade weather seal
  • Lockable v two nickel-pleated steel draw latches
  • Half the weight of metal - easier to move
  • 48" x 24" - Full size for 100 gallon equivalent storage
  • Gas struts easily lift lid and keep it in place
  • Fits between wheel wells in the bed of a truck
Online
$473.68 for EA
Mfr PN: BMJB4824FL
Stock: 10

18V LXT« Lithium-Ion Compact Cordless 2-Pc. Combo Kit (2.0Ah) 18V LXT« Lithium-Ion Compact Cordless 2-Pc. Combo Kit (2.0Ah)
Online
$313.74 for EA
Retail $462.00
Mfr PN: CT225R
Stock: 10

The Makita 18V Compact Lithium-Ion Cordless 2-Piece Combo Kit (CT225R) is built for the pro-user who demands best-in-class Lithium-Ion cordless tools for drilling, driving, and fastening in a compact size.It's part of Makita's expanding 18V Lithium-Ion series, the world's largest cordless tool line-up powered by an 18V Lithium-Ion slide-style battery. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

Feature:

  • 1/2" Driver-Drill with 2-speeds (0-600 & 0-1,900 RPM)
  • 1/2" Driver-Drill - compact design at only 7-1/4" & 3.3 lbs
  • Impact Driver - variable speed (0-2,900 RPM & 0-3,500 IPM)
  • Impact Driver - compact design at only 5-3/8" long & 2.8 lbs
  • Ergonomically designed handles with rubberized soft grips
  • Built-in L.E.D. light illuminates the work area
Online
$313.74 for EA
Retail $462.00
Mfr PN: CT225R
Stock: 10

14" Contractor Bag 14" Contractor Bag
Online
$29.46 for EA
Retail $49.99
Mfr PN: 831253-8
Stock: 10

The Makita 14 inch Contractor Bag is a convenient storage option for all trades. Made of industrial fabrics for durability and long life. Industrial fabric for use in harsh jobsite conditions. High-quality zipper f/easy operation & increased durability. Reinforced handles for added durability. Includes shoulder strap for added convenience.

Feature:

  • Industrial fabric for use in harsh jobsite conditions
  • High-quality zipper f/easy operation & increased durability
  • Reinforced handles for added durability
  • Includes shoulder strap for added convenience
Online
$29.46 for EA
Retail $49.99
Mfr PN: 831253-8
Stock: 10

18V LXT 3.0Ah Battery (2 Pack) 18V LXT 3.0Ah Battery (2 Pack)
Online
$169.92 for EA
Retail $299.99
Mfr PN: BL1830B-2
Stock: 10

Makita 18V LXT+ Lithium-Ion batteries charge faster and work longer than standard lithium-ion batteries, giving you and your Makita cordless tools unmatched performance and productivity for demanding applications. Category-leading charge time of only 30 minutes, so it spends more time working and less time sitting on the charger. It also features an L.E.D. charge level indicator to monitor battery charge. The BL1830B is compatible only with Star Protection tools, indicated by the Star Symbol+ and/or Yellow Battery Receiver under the tool.

Feature:

  • Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
  • Reaches full charge in 30 minutes or less
  • Compatible only with Star Protection tools, indicated by the Star Symbol+ and/or Yellow Battery Receiver under the tool
  • Battery delivers consistent power and run time in extreme temperatures, even in winter (-4¬F/-20¬C)
  • Battery resists self-discharge and remains ready for use even after long periods of storage
  • Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
Online
$169.92 for EA
Retail $299.99
Mfr PN: BL1830B-2
Stock: 10

5" Random Orbit Sander Kit 5" Random Orbit Sander Kit
Online
$142.62 for EA
Retail $144.00
Mfr PN: BO5031K
Stock: 10

Makita's 5-Inch Random Orbit Sander with variable speed, delivers fast, smooth performance with better grip and control. Ideal for woodworkers & finish carpenters who require a best-in-class random orbit sander. Comfort & ease-of-use features include an ergonomically designed rubberized palm that fits like a glove with even pressure & easy control. Includes abrasive disc, dust bag, and tool case. It is ideal for a wide range of sanding applications.

Feature:

  • Smooth & fast sanding with 3.0 AMP motor
  • Variable speed control dial to match the speed to the job
  • Large 1/8" random orbit action- fast & super smooth sanding
  • Pad control system for controlled pad speed upon start-up
  • Efficient through-the-pad dust collection system
  • Dust-sealed switch minimizes contamination
Online
$142.62 for EA
Retail $144.00
Mfr PN: BO5031K
Stock: 10


Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About Faber ToolsThe Faber Tools GuaranteeContact UsCustomer ServicePrivacy Statement

Copyright © 2009-2019 A part of the Intelastores, Inc. Store Network
Site Designed and Maintained by Inline Internet Systems, Inc.